The Level 2 kit includes
Full Body Harness – Our harness has been designed for ease of fitting and comfort.
The full body harness is accredited to BS EN 361 and is manufactured using 45mm water resistant polyester webbing.
The harness is fitted with a rear dee and a chest mounted front dee. Utilizing the front dee, the harness can be fitted with the cows tail/rope grab to achieve fall protection at the head of the ladder. The harness is fully adjustable and is fitted with rip stitch indicators, for visual indication of a fall on the harness.
Cowstail (short lanyard)
Our range of cowstails are accredited too or exceed EN354:2012
They have been deigned to provide a mechanical 3rd point of contact when the user needs two hands to complete their task. The cowstail’s are supplied with EN362 Autolocking karabiners suitable for use by right handed or left handed users.
Our rope grab has been specifically selected to work with our M11Ø kernmantle rope.
We have tried and tested the majority of industrial rope grabs on the market, and find our stainless steel unit robust, easy to fit and it runs smoothly up and down the rope. It is designed to provide a 3rd point of contact at all times where the user has to carry an object on the ladder. The short sprung loaded cam arm reduces the fall distance and loading on the user and ladder rung. The rope grab is accredited to en353-2
Our 11mmØ EN1891 “low stretch” rope is designed to work in conjunction with the rope grab as a running line on the ladder. Kernmantle rope is provided as it’s design ensures the inner load bearing core is protected by the outer sheath, providing good resistance to wear and ingress of dirt and grit. The rope will be provided with a sewn loop to accommodate the karabiner and a protected identification label.
Ladder Securing Strap
Our Hi Vis polyester ladder securing strap, is designed specifically for use with our re useable eyebolt and ladder yoke. The strap features a 2:1 pull ratio configuration with an alloy camlok fitted, to enable tightening of the device and wire lock karabiners on each end for attachment to the ladder bolt and ladder yoke.
The ladder strap has been designed so the user cannot place excess stress on the ladder.
Our Hi Vis polyester ladder yoke has been designed to work on industrial aluminium or glass fibre ladders. The yoke in conjunction with the ladder strap and ladder bolt secures the ladder with an even force on each stile. The yoke can be used with one securing strap or with two triangulation straps.
Re useable ladder bolt
Our range of reuseable ladder bolts(choose from 12, 20,22 or 26mm Ø) are designed as a ladder restraint device and as an aid to securing a leaning ladder.
They are 100% removable and re-usable and require no tools or test equipment to install. They meet and exceed all loads advised by the HSE and have been in service now since 1999 confirming their suitability.
We strongly recommend storing all your equipment and especially the rope in our heavy duty rope bag. The bag provides safe storage, has a specific place for all the component parts and allows rope to faked in, which ensures tangle free use.
Optional 6 Mtr Triangulation Straps
Our Hi Vis 6 Metre straps are used to secure the access ladder via a method of triangulation in conjunction with the ladder yoke and 2 x eyebolts. This system is used where an obstruction prevents direct attachment or where multiple ladder moves along an elevation may be required. The triangulation straps features the same design as our 3 Mtr ladder strap, with a 2:1 pull ratio configuration, alloy camlock and wire lock karabiners on each end for attachment to the ladder bolt and ladder yoke. The strap has been designed so the user cannot place excess stress on the ladder.
Karabiners supplied by Tetra are EN362 auto locking. The user doesn’t have to remember to lock the karabiner.
All our polyester products come with serial numbers and date of manufacture for identification, traceability and regular inspection.